Additional Information for Lexus Vehicles

ADDITIONAL INFORMATION

To access the diagnostic menus, there are 2 ways.

First way: with the key on, press and hold the info button, and turn the lights on and off 3 times.

Second way: press the display button, then press the top left corner of the window under the display icons, then the bottom left corner. do this 3 times.

Eject Navigation DVD

The DVD for the Navigation system is located in the glove box, but you will not see the "Eject" button anywhere.

You will have to press the "Menu" button on the right side of the Nav screen. You will see the "Map DVD" at the top corner.



After you touch on the " Map DVD". The next screen is the " Eject " buttom icon. Press that.



Here is your Navigation DVD.



Bluetooth Sound Adjustment

1. Press the start bottom twice( foot off the brake pedal) and headlight adjuster to " off "

2. While pressing on the " Info " button with your right index. Use your right hand turn the headlight from " Off" to " Headlight"( not AUTO), Off-Head, Off-Head, three times. This will lead you to the " Diagnostic Menu". You can touch on the top right screen " Menu"

3. For those that have Bluetooth phone you can touch the BT on the button of the screen.



This will lead you to the BT voice quality set. You have to play with it and see which setting is suit you best both for " Incoming call " and " Outgoing call". But hey, you can do it yourself and adjust it anytime you wanted. Enjoy.



Seat Belt "Buzzer" (turn off)

This will turn off your seat belt warning "beeping" for the driver and passenger side. This will only need to be done once in the lifetime of the car as it will retain in the vehicle memory.

*** According to Valet Park, you must have windows up... ***

1) Get into the car w/ ignition off and close the doors
2) Open the "flip console" to your left (mirror / gas lid console)
3) Start engine and set the LCD on the combination meter to the "ODO" display using the ODO/TRIP button. Turn off engine.
4) Now, W/O applying the brakes (don't actually start engine but turn on the electronics.), press the "Engine Start/Stop" button twice. You should see the check engine light and battery light on in the dash. (DO NOT START THE ENGINE)
5) Hold the ODO/TRIP button. Wait ten seconds, and while still holding the button, buckle the driver's seat belt.
6) The LCD displays "Seat Belt Buzzer On/Off". Release the button. Pressing the ODO button toggles the On/Off




Open Windows and Moonroof from outside vehicle: (2 Ways)
1) Hold down "unlock" button on the remote control for 5 seconds
2) Insert actual Metal key into driver door key hole and turn right & hold (also unlocks door)

Close Windows and Moonroof from outside vehicle: (I only know 1 way)
1) Insert actual Metal key into driver door key hole and turn left & hold (also locks door)

Are you getting the OIL MAINT RESET message' If so, here's how to get rid of it:

  1. Push the 'ODO TRIP' switch in the switch box to change the display to blank.
  2. Turn the engine switch off.
  3. Turn the engine switch on with the trip meter 'RESET' switch held down.
  4. Keep pushing the 'RESET' switch for longer than 7 seconds after the engine switch is turned on.
After the above operation, the master warning light comes
on, a warning tone sounds and the above message
appears to inform you that the engine oil maintenance
data has been reset.