07+Lancer/Outlander Software Navigation Bypass

PRE-INSTALL INSTRUCTIONS:

There are 2 application versions One of them is "00.20.68" and the other is "00.30.94". In order to figure out which Application version you have you need to hold SET and NAVI together. Proceed to Version Indication and make note of Application information.

For the 00.20.68 version only:

You need to download the ISO file from here (right click and save as) BURN THE ISO File to a CD. Personally I use PowerISO, you can download a free copy here: POWERISO TRIAL. Using PowerISO, right click on the .iso file you downloaded from me. Select "Copy Image to CD" and burn the CD.

For the 00.30.94 version only:

You need to download the ISO file from here (right click and save as). BURN THE ISO File to a CD. Personally I use PowerISO, you can download a free copy here: POWERISO TRIAL. Using PowerISO, right click on the .iso file you downloaded from me. Select "Copy Image to CD" and burn the CD.

The typical problem people have is that they don’t burn the ISO file correctly to the CD. If you are unsure you should type the following phrase into the google search engine Click Here to learn - "how to burn an ISO”

Now Follow the instructions below: for the Update procedure:

1. Extract files from archive.

2. Burn the ISO file on a blank, fresh CD

3. Start the engine and insert the burned CD into MMCS' unit

4. Wait for it to check the disk and to start the upgrade procedure. It may take up to a minute do make the checks.

5. Wait for the update procedure to finish. This will take 3 to 5 minutes. At the end the unit will reboot.

6. After start, you will be prompted AGAIN to update. Choose NO, the unit is already updated.

7. Remove the CD.

8. Drive carefully while enjoying your DVD movie